2201M

Machine 6 Indigo Blue #2201M

Click on any image to see full size

This is a right handed solid body electric guitar made from alder with a tigerwood top and finished in a translucent indigo blue. The color is very heavy, and in the right light the guitar looks almost black. But when you shine some light on it, that deep blue color comes through, and the grain is visible through the finish. Tigerwood is also sometimes called Brazilian koa, Congo wood or African walnut. The body is 1.75 inches thick and was hand shaped on a sander with a ¼ round edge all the way around. It’s a string through body with a HipShot black hardtail bridge. The hardware is also all black. The pickup configuration is a single coil in the neck position with a humbucker in the bridge. I wound these pickups myself and they measure out as follows; the neck pickup has ALNICO 5 magnets and reads at 6.3k and the bridge pickup also has an ALINCO 5 magnet and reads at 14.7k. The neck pickup sounds pretty clean by itself, and the bridge pickup is loud and gritty. The electronics are wired with a volume pot for each pickup and a three way selector switch. The neck is 24 frets and bolted on with recessed black ferrules for a sleek look. The neck is cherry with a 9.5” radius wenge fretboard and cherry position markers. The truss rod is a dual action spoke type and located at the heel end. My necks are all hand carved and the profile is considered a “C” shape. This one measures .894” (22.5mm) at the 1st fret and .930” (23.62mm) at the 12th fret, it’s quite comfortable. The frets are Medium Nickel-Silver .084″ wide by .039″ high. The tuners are black HipShot Griplock staggered inline locking type. The nut was hand shaped from bone. My guitars are set up to play with great action. The frets have been leveled, crowned and polished. The string height at the 1st fret is .012” and at the 12th fret it’s .060”. You’ll notice how smooth they are right away.

My guitars are set up to play with great action. The frets have been leveled, crowned and polished. The string height at the 1st fret is .012” and at the 12th fret it’s .060”. You’ll notice how smooth they are right away.

Materials and Specs

Body – Alder / Tigerwood top
Neck – Cherry / Wenge fretboard
Fretboard Radius – 9.5″
Frets – Medium Nickel-Silver .084″ wide by .039″ high
Truss Rod – Dual Action adjusted at heel (Spoke)
Nut – Bone
Neck Pickup – Single Coil ALNICO 5 Magnet 6.3k
Bridge Pickup – Humbucker ALNICO 3 Magnet 14.7k
Tuners – HipShot Griplock inline staggered tuners Black
Bridge – Hipshot brass bridge Black
Electronic Configuration – Pickup Selector / 2 Volume
Case – Custom G & G Quality Case / Python Tolex

$1,885.00

Shipping not included and will be calculated at the time of delivery. Additional 7.2% Sales Tax will be collected from residents of AZ.