Machine 6 Huron Green #2301M

Click on any image to see full size

This is a right handed solid body electric guitar made from alder and finished in a translucent blue/green finish. The color is very heavy, and in the right light the guitar looks almost black. But when you shine some light on it, that blue/green color comes through, and the grain is visible through the finish. The body is 1.75 inches thick and was hand shaped on a sander with a ¼ round edge all the way around. It’s a string through body with a HipShot chrome hardtail bridge. The hardware is also all chrome. The pickup configuration is a single coil in the neck position with a humbucker in the bridge. I wound these pickups myself and they measure out as follows; the neck pickup has ALNICO 5 magnets and reads at 6.6k and the bridge pickup also has an ALINCO 5 magnet and reads at 13k. The neck pickup sounds pretty clean by itself, and the bridge pickup is warm and gritty. The electronics are wired with a volume pot for each pickup and a three way selector switch and the control cavity and cover are shielded with copper tape. The neck is 24 frets and bolted on with recessed chrome ferrules for a sleek look. The truss rod is a dual action spoke type and located at the heel end. My necks are all hand carved and the profile is considered a “C” shape. This one is very thin and measures .858” (21.79mm) at the 1st fret and .886” (22.40mm) at the 12^th fret, from the back you can see that the fretboard is part of the profile. The frets are Medium Nickel-Silver .084″ wide by .039″ high. The tuners are chrome HipShot Griplock staggered  inline locking type. The nut was hand shaped from bone.

My guitars are set up to play with great action. The frets have been leveled, crowned and polished. The string height at the 1^st fret is .012” and at the 12^th fret it’s .060”. You’ll notice how smooth they are right away.

Materials and Specs